Відео

Lets see the bearing replaced as the heading says. You only show the hub being removed, that's the easy bit.

Lets see you get the bearing in and out. All you show in the video is the easy bit.

Ciao, ho una ford fiesta 2008 1.2 e ultimamente ho un problema di ebollizione del liquido del radiatore. La ventola di raffreddamento non sempre si avvia a 100°C e il liquido evapora e sul cruscotto mi si accende la spia della temperatura. A volte invece la ventola parte senza problemi! Aggiungo anche che ogni volta che accendo l'aria condizionata fredda A/C la ventola subito parte. Secondo te dovrei cambiare il sensore che hai mostrato in video? Hello, I have a 2008 1.2 Ford Fiesta and lately I have a radiator liquid boiling problem. The cooling fan does not always start at 100°C and the liquid evaporates and the temperature light on the dashboard. Sometimes the fan starts without any problems! I also add that every time I turn on the cold air conditioning A/C the fan immediately starts. Do you think I should change the sensor you showed in video?

Do I have to center the steering rack before?

Great video, thanks for the advice on this

Hello brother can you help to understand my Figo turbo is having leakage since then mileage dropped also pickup dropped is that issue related to Turbo only ??

Due turbo does Mileage also drop??

Price ??

perfect! just bought a ford transit connect 1.5 ecoblue/Mattias from Sweden

Hi bro my car is ford figo 2014 1.4 tdci model when i checked the turbo to intake manifold hose there is a slight oil leak but the turbo shaft play is normal and vehicle acceleration is also quicker but there is a black smoke not too much after 3500 rpm on first gear and third gear driving

Bhaiya my car is Swift VDI, I have changed the turbo in it, got the injection cleaned but still there is inter cooler oil in it and it is giving out black smoke, so brother what should I do

Applied my full body power, applied WD-40 and done everything possible in it. Still not able to open, any suggestions for it😅 Only 60k driven.

Hi I have ford ecosport 2020 tdci 1.5 diesel. Sometime in the middle of driving, the speed gets downgrade for no reason without any major issue. Actuator is working fine and all sensor have current. There is no oil consumption in turbo & no play or anything. No check engine light or any service light. As scanned, no major dtc code, just there is a code ‘turbo supercharger under boost’ when DTC code is clear it work fine for long time. What should I check in this cases. There is no authorised ford service centre in my localities. Would be grateful for the help in advance.

STOP USING A.i Voices for video! INSTANT THUMBS DOWN

my ecosport 2020 diesel is driven 60390kms as of now. So is there any need for cleaning?

Is it good to remove egr permanently ? Ford Figo 2010 TDCi ?

Did you only replace the injector no. 4? Seen people claiming you should replace all 4 because if 1 or 2 are bad others are also worn. But it can clearly be seen that only no.4 is looking bad in this test.

Can i lose coolant from reservoir if coolant temp sensor bad?

My 2010 Hyundai Accent is stalling repeatedly when trying to start.

I have a 2007 Dodge Caliber When turning left or right a croaking noises are made and I have a leak of power steering fluid not from the steering hose. I replaced the power steering pump I’m thinking it’s the rack and pinion any other ideas??

que modelo de auto es no se ve??

I have 2005 toyota sequoia and yesterday, the temperature shot up high when I got stuck in traffic. Waited for an hpur or so to cool down and replanished water in the radiator. Plannong to replace the coolant temperature sensor but not sure if its the ac air fan sensor, which makes the coolant sensor to to kick in?. The reservoir spews coola t after an idle run and while turning the Ac on, i did not notice the ac fan running high and instead its runs very slow. What do i need to do?. Thank you

Super bro 👌

Yes it realy works but u most costantly 3-4bottle

I am having a similar problem, the rattle! I found it last month and am about to go after the problem... I wonder about the tape? It gets awfully hot down there and those pins need to be able to allow movement without gumming up. I see tape as an easy solution, but maybe there are others.. Like replacing the pins? Replacing the bolts? Any other ideas out there? What kind of bushing could you put in there?

Can egr malfunction cause black smoke and low power? Like when I step on the gas my car doesn't accelerate and releases black smoke, there is also check engine light, but its not all the time that it happens, like couple of days ago it happened but today it was running fine just the rough idle after starting the car but rough idle is gone after about 30 seconds

Maruthi A star same not starting

Can I use Throttle body cleaner as cleansing agent?

Maaaaan mines runs like CRAP, Ive rebuilt the tranny, rebuilt the engine, whole new exhaust, but not the manifold, changed plugs and coils, throttle body, all that. but for some reason my transit runs like it did before I did all this. And to mention I have no check engine light. Any reason to why mines still has sluggish acceleration and poor fuel economy??!!!

Question. My lights go dim on dash occasionally i rough idle....i replaced started because it would barely start now no issues except ones stated above. Whats some thoughts is it ny alternator?

Thanks a lot. Problem solved. Any idea why does this happened?? Any root cause for the movement of the balancing rod

What if my cooling fans stay on constantly only when AC is on? No check engine light or anything but is that normal?

Where can I get simen injector in india.

How to adjust the brakes setting ?

Which brand bearing are you using what is part number?

Sir my Ford Fiesta 1.4 TDCI is having stalling issue after I got its AC's cooling coil replaced . The problem never existed in my 15 years of using it. The car drops rpm so low only when clutch is pressed that the engine stalls.Car has no DTCs or warning lamps. Local mechanics here not able to identify issue. Plz guide me . What I have done- Cleaned MAF Sensor Intake Manifold Housing and EGR cleaned. Though pickup has increased and black smoke reduced after all this but the main issue of stalling still persists.

Glow plug Part number please

How much torque on the caliper bolts?

Hi there I have the same car just done all the return leak pipes and put all the injectors back in its running but leaking fuel out from the injectors if you can help please 🙏 thank you stu uk 🇬🇧 England here

Bro figo first gen 13 model non abs.. Ethrayakum? Fronth both rotors?

ford fiesta diesel white smoke on high rpm..why?

Hei. Can you give me right answer? I have one insignia 2.0diesel. No smoke, but shaking when i push gaspedal. New: diesel filter, air filter, oil, coolant water cleaned air flow sensors. New timing belt, water pump and something other things. No fault code. When i go up to 3000rpm shaking gone and looks like give enough diesel. Goes without any problem after. Stop the car and shaking again with accelerating. And then is gone around 3000rpm. And to the next start goes easy. Maybe one injector is bad? 261.000km in car.

Thankyou!

I'm currently expecting a growling noise when car is idle and my windows are slowly functioning. Can replacing the bearings in the alternator solve the problem?

Hit ? 🤔

Please what’s the name

I have been trying to figure out what I forgot to install on my drum when it came off and it was that ABS ring. I have watched several videos and none of them but yours showed this, so thanks a lot for that. You did a great job of showing how to replace the bearing.

My car started sputtering on WOT and had a rough idle, it turns out that one of the wires to the electrical connector attached to the alternator corroded and broke off.

I LOVE this video. New brake pads, rotors, calipers, ETC.....ALL NEW, then paid 2 reliable brake service companies of a total of over $500 to completely go through the brake system and both did a complete re-bleed and they both could not find out how to fix this problem. So sad I had to spend so much money to brake companies who don't know everything about your brakes and that I had to spend weeks searching because I finally typed in search engine with the right words to find your video in order to solve myself.

2006 Chevy Cobalt and my AC is sporadically working. When the Coolants Temperature isn't working and showing 3 dashes, my air is hot, but when it works and shows a temperature, my AC is cold? Would the Coolant Temperature Sensor be the problem or maybe something else?